The Best Vacuum Cleaner Attachment To Clean Dryer

Product Description

The most valuable tool you can own to ensure the safe operation of your clothes dryer is the LintEater. The LintEater, designed for homeowners by a leading manufacturer of professional duct cleaning equipment, makes the regular maintenance of your dryer vent system easy. It effectively removes dangerous lint buildup in almost every type of dryer vent, eliminating a leading cause of house fires. The auger brush and flexible extension rods screw together and spin when powered by your cordless drill (not included). The rotating action of the auger brush and flexible rods scours your entire vent wall surface while traversing the multiple turns that are common in most dryer vent systems. Completely remove all loosened lint from the vent while brushing with the included shop vac or blower adapter. Exceptional reach also makes it a snap to clean behind, underneath and all around your dryer, appliances, baseboard heating vents and other hard-to-reach areas. Reduce drying times and save money on utility bills while ensuring the safety of your home: it’s easy when cleaning with Gardus power!

Linteater: Everything you need to clean and maintain your dryer vent system with professional results!

Amazon.com

Product Description

The LintEater 10 Piece Rotary Dryer Vent Cleaning System is designed for the homeowner by a leading manufacturer of commercial duct cleaning equipment and comes with everything needed to clean and regularly maintain the entire dryer exhaust venting system with professional results.

How LintEater Works

Unlike typical manually operated vent brushes, the superior design of the LintEater Auger Brush allows both air and loosened lint to pass through the durable bristles for easy lint removal. The rotating action of the self-feeding Auger Brush and flexible rods scours the entire vent wall surface, while smoothly navigating the multiple twists and turns that are common in most exhaust vents.

Easy to Use

The included adapters enable you to use the air from the clothes dryer, shop vacuum or electric blower to completely remove lint from the vent while rotary cleaning at the same time. The Operator’s Manual has detailed, step-by-step instructions and illustrations covering many different cleaning situations, based on decades of professional experience and techniques.

Multiple Uses

The Lint Brush will reach 42 inches when connected to one flexible rod – all the way to the bottom of your lint trap. The brush head is bendable to conform to tight spaces and works for both top and door mounted lint traps. The brush filaments are extremely durable and may be repeatedly washed to provide years of use. The exceptional reach makes it a snap to clean behind, underneath and all around your appliances. Use it to clean baseboard heating vents or connect several rods to clean ceiling fans, vertical blinds, cobwebs or any hard to reach areas around the home.

The Blockage Removal Tool can be used to dislodge and clear animal and bird nests in the exhaust vent prior to rotary brushing and also clears debris from clogged gutter downspouts – without stepping foot on a ladder.

The optional 12 Foot Extension Rod Kit adds to the LintEater Rotary Dryer Vent Cleaning System for exhaust vents longer than 12 feet. The optional LintCatcher captures loosened lint from the dryer vent while rotary brushing.

See all Product description

Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator, Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap, If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. Please make sure that your vacuum hose has a diameter of 1 1/4 inches or less. some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool, This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit. Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work, Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure).

Long Dryer Lint Cleaning Brush + Flexible Crevice Tool–100% Satisfaction and Money Back Guarantee

Specifications:

Duct cleaning brush kit: Length: 30 inches    Bristle Diameter； 1.5 inches

Dryer vent Never Clogged Again, Low energy consumption and Safe Running.

Vacuum Hose Attachment: Length 24 inches   Tapered Tip: 15mm Width

You can Dip the hose end into warm water to ensure an easy inserting.

Package Including:

1pcs*vent brush

1pcs*crevice tool

2pcs*adapters

The Hose Attachment Does not fit for Dyson V7, V8, V9, V10 vacuum cleaners, Fits well for Most Vacuum Hoses with a diameter less than 1.5″ , Like Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. With The Adapters, it Can Also Fit for Dyson DC35, DC44, DC45, DC48, DC52, DC58, DC59, DC62, V6 models

If you are not sure if it will fit your Shark vacuum or any vacuum you have, please ask a question and we will respond.

This is not an Shark Original product and is not covered under any Shark warranty.
The Shark brand name and logo are the registered trademark of the respective owner.
Any use of the Shark brand name, model or part designation for this product is made solely for purposes of demonstrating compatibility.