Top 9 Usb C Desktop Card

Features
Extend with 1 USB 3.0 Type C, 3 Type A downstream ports for standard desktop PC
Support UASP:70% Faster than traditional USB 3.0 with UASP. The UASP Transfer Protocol only can accelerate read and write speed of SSD hard disk
Compliant with USB 3.0 specification.
Compatible with USB 2.0 & 1.1 specification.
Date transfer rates up to 5.0Gbps – 10x faster than USB2.0
Plug & play and hot swapping capability.
Bus-powered mode and no external power required for most of peripherals.
Operating Systems
Windows XP, Vista and Windows 7(with included drivers)
Windows 8/10-No additional drivers are needed for Win8/10, it has built-in support for the FL1100 chipset
Notice
If your PC’s power supply unit only has free 4pin Molex plugs left, please use the enclosed 4pin Molex to SATA converter to power the card.Please make sure the power cable strand colours match each other when connecting to the power augmentation, as to avoid faulty currents.
If there is no free 15pin SATA plug available in your PC, please use the enclosed 15pin to 2x 15pin SATA Y-cable.
Internal USB3.0 20PIN Connector need work with USB3.0 20PIN Adapter to Achieve 2x USB3.0 Hosts – USB3.0 20PIN Adapter is not included in Package
To ensure the PCI Express Card works properly, please first connect the PCI Express Card to your PC’s power supply.
Aggregate transfer speed up to 500 MB/s (500 MB/s in total for the whole). For Oculus Rift users, it is recommended to purchase two PCI-E cards for multiple sensors.
This PCI-E card is not recommended to Kinect 2 users.
Package
1x USB3.0 PCI-E expansion card
1x SATA to 4 Pin Molex Power Converter (the cable in older computers without 15pin SATA power connector is used to 4pin convert Molex to SATA ports)
1x 15pin to 2x 15pin SATA Y-cable
1x CD Driver
1x Mounting Screw
1x User’s Manual

USB 3.1 Type-C a super fast, convenient and powerful data transfer solution.

Features:

• No need any extral power.
• Plug & play and hot swapping capability.
• Two USB 3.1 Type-C female connectors available.
• Stable and reliable ASMEDIA Chipset ASM1142 and 1543.
• Bus-powered mode and no external power required for most of peripherals.
• Low-profile bracket available for small computer & server case, like 1U & 2U.

Specifications:

• PCI-E 4X connector fits PCI-E 4X, 8X or 16X slot.
• Supports 10Gbps PCI-E bus with full duplex channel.
• Support Windows 7 / 8 / 8.1 /10 & Linux Kernal.
• Support 5V Max 2A power output to each USB 3.1 device
• Built-in over current protection and short circuit protection on each USB port
• Support SuperSpeed+ (10 Gbps), SuperSpeed (5 Gbps), HighSpeed (480 Mbps), and FullSpeed (12 Mbps) (Note: The actual transmission speed is limited by the setting of the device connected.)
• Support USB 3.1 devices,backwards compatible with USB 3.0, 2.0 & 1.1
• Compliant with PCI-Express specification revision 2.0x2X
• Support PCIe 1.0, PCIe 2.0, or PCIe 3.0 motherboard, Compliant with PCI Express Base 3.0 Specification, Compliant with Universal Serial Bus 3.1 Specification

Package Includes:

• 1 x PCI-E 4x Express to USB 3.1 Type C USB-C Dual Port Add on Expansion Card Adapter
• 1x Low profile bracket
• 1x Manual
• 2 x Screws

Please note that it is PCI-E 4X card and does not support PCI-E 1X slot.

Characteristics

– Add 5 Gbit / s USB 3.0 with 2 Type-A and 1 Type-C to your desktop PC.
– Convert M.2 SATA III-based SSD for use in the mainboard PCIe x1, x4, x8 or x16 bus slot.
– Supports PCIe Gen3 and PCIe Gen2 M.2 NGFF 80mm, 60mm, 42mm, 30mm SSD.
– Supports PCIe 1.0, PCIe 2.0 and PCIe 3.0 motherboard.
– Standard size PCIe bracket and low profile bracket included.
– Supports industrial operating temperature range: -40 – 85 ° C
Operating systems

– Windows XP, Vista and Windows 7 (with included USB drivers)
– Windows 8 / 8.1 / 10 – No additional drivers are required for Win8 / 8.1 / 10.
Package contents:

1 x MZHOU PCI Express adapter card with screws.
1 x low-profile PCIe bracket
1 x SATA cable
Note:

– Before installing, please make sure that a PCI Express x1, x4, x8 or x16 slot is available. Not suitable for PCI slot.
– It is only designed for M.2 SATA III SSD with B-Key. Not compatible with M.2 PCIe / AHCI SSD.
– Windows 7/8 / 8.1 / 10 / Linux with included drivers. No additional USB drivers are required for Win8 / 8.1 / 10.
– When inserting the M.2 SSD into the SATA protocol, one end of a SATA III data cable must be used, which is connected to the SATA interface of the riser card, and the other end of the SATA III interface of the mainboard.

This USB 3.1 card lets you add two USB-C ports to your computer, through a PCI Express slot. It enables you to upgrade your current system by adding two USB 3.1 Gen 2 ports to your computer and giving you access to data transfer speeds up to 10Gbps. With the addition of two USB Type-C ports, you can rest assured your computer is compatible with the growing popularity of USB-C peripherals. Faster USB performance By adding 10Gbps USB ports to your computer, you can harness the speed of USB 3.1 Gen 2 and rest assured you’re ready for both current and future high-bandwidth USB-C devices. With higher data throughput support, this USB 3.1 Pie card is a necessity for external drives, drive enclosures, and many other USB 3.1 peripherals. Plus, the USB card includes an optional SATA power connector to connect to your system power supply and deliver up to 900mA of power per port to USB 3.1 bus-powered devices (500mA for USB 2.0). The card is ideal for use with large external storage solutions. Compatible with older USB devices The card is backward compatible with USB 3.0 (5Gbps) and USB 2.0 (480mbps) devices. You can add the card now for use with newer USB-C devices, while still connecting your existing USB peripherals using a variety of USB-C cables and adapters. Easy installation The USB 3.1 card is compatible with a broad range of Windows and Linux operating systems. Plus, the high-quality card includes both standard-profile and low-profile brackets, making it easy to install in full or small form-factor PCs and servers. The PEXUSB312C2 is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Motherboard 20pin Header to 5 Ports USB 3.0 Female Back Panel Cable Adapter with PCI Bracket and 15-Pin SATA Power Connector

⭐ If your PC have an 20-pin usb 3.0 port and want to create more external USB ports and USB C ports on the back of your computer, this card will meet.

⭐ Supported Operating Systems:Windows XP, Windows 7,Windows 8 and Window 10, Vista,Mac OS X, Linux and Chrome OS.Windows XP and Vista Users Please Note: Due to OS limitations, the real transfer speed after installation of the respective drivers will be located between the level of USB 2. 0 and 3. 0.

⭐Using Steps

✔1.Find the corresponding 20-pin connector on the motherboard.Then connect USB-IN port to it with USB 3.0-20Pin cable.(Please note: if the 20-pin connector on the motherboard is occupied, please unplug it and connect it to the USB-OUT(20-pin). Port on the expansion card.

✔2.Connect POWER-IN port to power supply with sata power cable.

✔3.Find the corresponding PCI-E interface on the motherboard to plug into the expansion card and tighten the screws.

⭐Package Content

*USB 3.0 expansion adapter

*Sata 1 to 2 power cable

*20-pin USB cable

*Screws

♡Hardware requirements: ♡

Available 20-pin USB 3.0 Motherboard Connector Header;

Available PCI Slot on PC Case.

♡ Kindly Note ♡

This USB Card can use only the desktop PC which inside have 20-pin usb 3.0 header; (Now almost all the desktop PC are have 20-pin usb 3.0 header. But if your PC are more than 10 years old, please check your host.)

Kingwin KW525-3U3CR is a multi-function front panel powered USB Hub. Comes with 3.0 w/ 1 USB-C Port, SD Card Reader & Micro SD Card Reader – Sata Power Port – 5.25″ Computer Case Front Bay. Our computer components are designed for optimal performance and high quality multi-functional purposes. Our Lighting Speed USB 3.0 Hub and SD card reader writer capabilities out perform the rest. It supports Super Speed USB 3.0 up to 5 Gbps bandwidth with three front accessible USB Type-A ports, one front accessible USB Type-C port, one front accessible eSATA port, and all in 1 high speed card reader. The high speed card reader is compatible with most popular formats of flash media on the market, SD/MMC/SDHC, CF/CF II/HS CF/MD, MS/MS Duo/MS Pro, XD, TF/T-Flash, M2. The USB 3.0 hub is also backwards compatible with USB 2.0/USB1.0/USB1.1. Kingwin KW525-3U3CR provides easy access of your data through the front panel, with it’s convenient design it is a must have solution with all your PC components. Features Model: KW525-3U3CR Super Speed USB 3.0 supports up to 5 Gbps of bandwidth Three front accessible USB 3.0 Type-A ports One front accessible USB Type-C port One front accessible eSATA port All in 1 high speed card reader Support SD/MMC/SDHC, CF/CF II/HS CF/MD, MS/MS Duo/MS Pro, XD, TF/T-Flash, M2 Backward compatible with USB 2.0/USB 1.0/USB 1.1 Fit any 5.25” computer case front bay Specifications Product Name: USB 3.0 Hub w/ Card Reader Includes 1 USB-C Port Port Model: KW525-3U3CR Material: ABS/Plastic Interface: USB 3.0 Dimensions: 5 7/8″ W x 1 11/16″ H x 3″ D Output Interface: USB 3.0 Input Interface: 1 x eSATA Port 3 x USB 3.0 Type-A Ports 1 x USB-C Port 6 Slots Card Reader Transfer Rate: Up to 5 Gbps Weight: 0.45 lbs Color: Black Supported Systems: Windows 10/8/7/Vista/XP, Mac OSX 10.2+