Top 9 Parts For Pool Vacuum 280

If you live in south of United States, you will find that your Polaris pool cleaner need to run year around.
Especially during everyday use, your filter bags‎ may become damaged or be too worn for further use.

JamBer Superior Compatible Polaris 280&480 Replacement Bags would be a champ maintaining your pool!
❤Premium quality filter bags makes pool cleaning a super easy job.
❤Enhanced clips for easy and secure connectivity.
❤Mesh pool bag is fine enough to catch sand,leaves and small twigs easily.
❤Awesome zipper closure makes emptying 3 times easier!
❤Hook and loop fasteners to attach to the hose exactly like the original bag.
❤Always have a dry one handy to switch.
❤A perfect replacement for the OEM bag at a fraction of the cost.

How to Replace a Pool Cleaner Bag:
Step 1:Turn off your booster pump and disconnect hose from the dedicated pressure cleaner line,then remove your cleaner from the pool.
Step 2:Find the all purpose zipper bags on the top of cleaner,the bag’s plastic cuff is the fastening element that keeps the bag attached to the cleaner during operation.
Step 3:To release the pool sweep bag,turn the bag’s plastic cuff either clockwise or counter a fraction of an inch to release the pressure paddles inside the cleaner body and lift up.
Step 4:Discard worn or damaged zipper filter bag.
Step 5:With your new pool filter Bag in hand, align the pressure paddles on the bag cuff and the arrow on the cleaner connector pipe and slide down until your hear it snap into place.

Package Included:
2 x all purpose bag‎ for Polaris

Notes:
1.These vacuum cleaner replacement bags fit tight,please slightly twist as you’re depressing the buttons.
2.Please make sure to tuck the ends of the zipper fully under before completely zippering closed.
3.When you first put it in the water you need to squeeze all the air out of the replacement bag.

????????‍♀️If you love swimming,then you need a Polaris cleaner bag to keep your pool clean.So that your hobbies are not affected.

????Product Advantages

Our Polaris bags have beenhave been tested many times,unlike other bags on the market which are flimsy, rip easily and have poorly constructed intake mechanism our Polaris bags our designed to outperform the original bags.
With zipper design and Ultra fine mesh technology, it can effectively help you remove debris,such as: leaves, paper scraps, sediments…keep your pool clean and tidy.

????Easy to use

1.Turn off your booster pump and disconnect hose from the dedicated pressure cleaner line,then remove your cleaner from the pool.
2.Find the all purpose zipper bags on the top of cleaner,the bag’s plastic cuff is the fastening element that keeps the bag attached to the cleaner during operation.
3.To release the pool sweep bag,turn the bag’s plastic cuff either clockwise or counter a fraction of an inch to release the pressure paddles inside the cleaner body and lift up.
4.Discard worn or damaged zipper filter bag.
5.With your new pool filter Bag in hand, align the pressure paddles on the bag cuff and the arrow on the cleaner connector pipe and slide down until your hear it snap into place.

????Package

2 x All purpose filter bag‎ for Polaris

????Note

1.Please confirm your model of the Polaris before purchasing.
2.When you put the bag in water, you need to squeeze all the air out of the replacement bag, otherwise the bag may float on the water.
3.Specific grid design, if you find that the cleaner bag suddenly does not work, it may be because the grid is blocked by the garbage inside the bag.
Excessive garbage will cause the cleaning bag to be airtight and there is no way to breathe, so it is necessary to regularly clean the leaf bag.

This aftermarket sweep hose complete is particularly designed and made for Zodiac Polaris pool cleaner models 180, 380, 280, 480 PRO and also compatible with Zodiac Polaris pool cleaner models Vac-Sweep 380, Vac-Sweep 280, 280 TankTrax. It scrubs and removes algae & debris from pool floor, walls, corners, and steps. ***When should you replace the Polaris Sweep Hose?*** The sweep hose should be replaced when there is evident wear/damage that is preventing the sweeping function necessary to scrub the interior of your swimming pool.

The MiMoo Sweep Hose Tail Scrubbers Replacement are nice replacement for the pool cleaner tail hose. It could replace worn out scrubbers to ensure that Pool Cleaner dislodge algae, dirt, and debris from swimming pool floors, walls, and steps area. Keeping swimming pool or vacuum clean at full capacity.

Features:

1. Use: Replace worn out scrubbers to keep pool or vacuum cleaning at full capacity.
2. Good Compatibility: Work on many sweep pool cleaner, including Polaris 180, 280, 360, 380, 480 and 3900 Sport.
3. Setup Easily: Simply remove the worn out scrubber and replace a new scrubber to the Hose Tail.
4. Top-quality: These scrubbers are made from the top-quality filtration foam.

Size:

Outer Diameter 1.75 inch
Inner Diameter:0.5 inch
Length:2.75 inch

Fits models:

PERFECT FITS on the end of the sweep hose on the Pentair Letro Legend, Legend II, Platinum pool cleaners.
Polaris 180, 280, 380, 3900, 480;
Zodiac Polaris pool cleaner models 480 PRO, 3900 Sport, Vac-Sweep 380, Vac-Sweep 360, Vac-Sweep 280, 280 TankTrax

Kindly Reminder:

Sweep Hose Tail Scrubbers Replacement Design to replace worn out scrubber.
Replace the Sweep Hose Tail Scrubber frequently can extend the life of the Pool Cleaner.

Package:

12 x Pool Cleaner Sweep Hose Scrubber Replacements