Top 9 Ice Maker Pvc

Product Description

Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.

From the Manufacturer

Ice Maker Connectors (15-Foot)

This Eastman 60234 Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch CPVC inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

For years, licensed plumbers, electricians and appliance installers have relied on Certified Appliance Accessories for their power cords, hoses and connectors. Now you can too. Enjoy the convenience offered by this ice maker connector from Certified Appliance Accessories. Its flexibility and durability ensure a reliable connection for your next home installation project. This hose has been thoroughly tested and is backed by a 5-year limited warranty. Check your appliance’s manual for the correct specifications to ensure this is the right connector hose for you. Thank you for choosing Certified Appliance Accessories—Your Appliance Connection Solution.

Product Description

The Eastman 48380 Ice maker connector has a 1/4-inch comp x 1/4-inch comp connection and is 10-feet long. The supply line features a PVC core that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
Eastman’s 10′ Icemaker Reinforced PVC Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 10′ Icemaker Reinforced PVC Supply Line is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

Product Description

Compression x compression x length, stainless steel ice maker connector. Use to connect most refrigerator ice maker in-line filters.

From the Manufacturer

LASCO 10-0958 Braided Stainless Steel Icemaker Supply Line, 1/4-Inch Compression x 1/4-Inch Compression x 20-Foot Long. Braided stainless steel icemaker supply line. 1/4-inch female compression x 1/4-inch female compression x 20-foot. Connect from 1/4-inch compression outlet stop. Connect to inline filter or refrigerator icemaker. Lead free product, meets California AB-1953, Vermont, and new federal standards for low lead applications. LASCO, Lasco Supply Company Inc, The Preferred Brand! Service, Selection, and Support!  Larsen Supply Company is 3rd Generation, Family owned and operated for over 80 years.  LASCO packaging includes helpful how to instructions and related project item information.  LASCO has the largest retail plumbing line in the industry today with over 7000 packaged and 16,000 bulk SKU’s. Visit our online web site catalog for one of the most complete product listing in the industry.

Product Description

The Eastman 48389 Appliance Connector Supply Line features stainless steel braided body and has a 1/4-inch x 1/4-inch connection. It meets AB1953 as well as CUPC standards.

Eastman’s 10 ft. Stainless Steel Ice Maker Connector is the standard in ice maker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 10′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

Product Description

This Fluidmaster Braided Stainless Steel 6-Foot (72 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.

From the Manufacturer

Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.

Product Description

The Eastman 41033 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 5-feet long. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
Eastman’s 5′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 5′ Stainless Steel Icemaker Connector is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.