845 reviews analysed
1. USA Material CR10 S4 Silicone Heater Pad 400x400mm for CR-10 S4 3D Printer Bed w/Screw Holes, Adhesive Backing + Sensor (120V)
Feature
- high temperature silicone heater pad for Creality CR-10 S4 3D printer
- This silicone heating pad with 4 pre-made screw holes as the drawing shows is designed for CR-10 S4 3D printer building plate.
- With 1.2meter NTC 100K 3950 thermistor for temperature Control (Choose Number 1 in the Marlin firmware)
- Please DO NOT POKE NEW HOLES for this bed as the whole pad is a circuit, so it will 100% damage the circuit if you poke new holes anywhere
- Important Notes: Please heat only after being mounted onto the plate. Do Not heating without proper heat-sink.
Description
This silicone heating pad with 4 pre-made screw holes as the drawing shows is designed for CR-10 S4 3D printer building plate.
Backing:3M adhesive backing
Size: 400mmx400mm
It’s Electricity AND Heat you are coping with. We are absolutely your right choice with 100% guarantee for high quality heaters
Much safer and more reliable heat source than RepRap PCB heatbeds.
With 1.2meter NTC 100K 3950 thermistor for temperature Control.
Power consumption: 1000W.
Attached with two pieces 1.2meter length power wire
2. 3D Printing Build Surface, 16”x16" (400x400mm) 3D Printer Heat Bed Platform Sticker Sheet with 3M Adhesive (Pack of 3)
Feature
- [SPECIALLY DESIGN PATTERNS] DOBSTFY Heat Bed Platform Sticker made of high quality matte surface material, it can make you easy clean removal the printed part afterward, and print directly on to the surface without any additional adhesives, tapes, or slurry. With the specially designed patterns of scaling and positioning, mark can make your DIY processing more fun and easy.
- [EASILY TO USE] Background is made of 3M adhesive, easily stick on the heat bed platform, and instant bonding with convenient use. It installs more quickly and with fewer bubbles than tape or films.
- [FULLY COMPATIBLY] Our 3D Printer heatbed platform sheet durable construction allows for multiple uses with either the same or different filament material. Compatible with PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments.
- [REUSE & CUTTABLE] The 3D-printing build surface is an 16″ x 16″ (400x400mm) square sheet, reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results. This sheets can be asily cut down to desired size by scoring with a utility knife.
- [LIFETIME WARRANTY] We stand behind every product you purchased from us. If you have any problem with your purchase, please contact us directly to get efficient and hassle-free customer service.
Description
DOBSTFY Brand 3D Printer platform can be suitable for temperature from 80 to 100 Celcius. Build sheet adheres to a print bed to help the filament stick during printing, it is easy to take off the models. Compatible with most Cartesian style 3D printers and most of surface. The build surface size is 16″ x 16″, you can cut it to any size you want.
[HOW TO REMOVE THE BUILD SURFACE FROM HEAT PLATE]: Heat the bed to 50~60 Celcius, then use a putty knife or print removal tool gently work blade along edges, then you can easy to remove it. Finally wipe with acetone or alcohol after the bed/glass cools back down. Please be careful not to scald your hands.
Package includes:
2PCS * 3D Printing Build Surface Sheets
3. KEENOVO Silicone Heater 400x400mm 1000W for Creality CR-10 S4 3D Printer HeatedBed w/Digital Controller & Pre-made Screw Holes (120V)
Feature
- Excellent heat source for your Creality CR-10 S4. A ” Plug & Play” solution with a standard US 2 prong plug fitted.
- Integrated with digital controller of large capacity( 30A), ready to be used with NO MORE tedious wiring before precise temperature is possible.
- Controller well insulated in silicone case, and provides Dispaly in Fahrenheit( Celsius by default) as well as a timer function after configuration.
- Custom Heater Design Welcome
- Item Location: Shanghai, China
Description
Important Notes: 1)——-Please read the Controller Configuration Manual, especially the “Advanced Setting” part, carefully BEFORE making any changes on the controller. 2)——-The controller unit is 100% brand new. But due to manufacturing reasons, stains, dusts or scratches may be present on the silicone case. The case may also fit loosely. Please consider this before the purchase. 3)——–Please heat only when after it’s mounted onto the build plate (Aluminum plate recommended). A supporting frame/layer is strongly suggested to have the heating element “sandwiched” tightly for better heating result.
4. Creality CR-10S Pro Aluminum Heated Bed Replacement Kit 24V 220W
Feature
- Installation was very simple and the quality is an improvement from the factory original.
- Decent heated bed: Great replacement part. Flat and quick to heat up!
- Made of hard aluminum plate, harder and smoother than others.
- Product Process: Aluminum Substrate
- TYPE: Integrated Circuit
- (1) Voltage: 24V
- (2) Power: 220W
- (3) SIZE: 310mmx320mmx3mm
- (4) Work with CR-10S Pro and CR-X
Description
For Other Creality CR-10S Pro Accessories:
1. Creality CR-10S Pro Motherboard: Search by B07TZP5SGZ
2. CR-10S Pro Nozzle, Creality 6-Pack M6 Thread Extruder Nozzles Copper 0.4mm: Search by B07YW7PT2S
3. Creality CR-10S Pro Heated Bed Springs (4-Pack) : Search by B07XD1KL62
4. Creality CR-10S Pro Extruder Kit Aluminum Alloy Dual Gear for CR-10 /CR-10S /Ender-3 /Ender-3 Pro: Search by B07XG13ZFG
5. Creality CR-10S Pro 24V Extruder Hot End Kit Nozzle 0.4mm with Heater Block Silicone Cover: Search by B07VZ554WN
6. Creality CR-10S Pro Full Assembled Extruder Hot End Kit with Heater Block Silicone Cover: Search by B07VVWX57D
7. Creality CR-10S Pro Original Long Distance Metal Remote Extruder Kit: Search by B07W18WRV3
5. 2 Pack 3D Printer Glass Print Bed for Ender 3-235 x 235 x 4mm – 8 Printer Bed Clips Included – Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro Tempered Glass Replacement
Feature
- 3D PRINTER PARTS AND ACCESSORIES: This listing is for a 2 pack of 3D Printer Beds made from tempered glass. 8 custom printer bed clips are also included. The 3d printer heatbeds are securely packed in custom foam. This means they won’t arrive shattered or cracked.
- WIDE RANGE OF COMPATIBILITY: These 3D Printer Bed Plates are compatible with Creality Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro, Geeetech A10, and any other 3D printers requiring a 235x235mm print bed..
- PRINTER BED CLIPS INCLUDED: You will no longer need to use ugly black binder clips. Not only are they poor quality, but they limit the build area. The clips included with this 3D printer surface look great and maximizemaximise your build area.
- PERFECTLY FLAT 3D PRINTER PLATFORM: Using a rivals inferior quality 3D printer hot bed that isn’t perfectly flat can cause adhesion and print quality issues. With our tempered glass sheet you never have to worry about these problems.
- TEMPERED GLASS PLATE: The tempered glass is of superior quality to typical borosilicate plates provided by our competitors. The tempered glass is totally flat and smooth, with no dips or pits. Tempered glass is more durable and lasts longer than borosilicate, so you need to replace the plates less frequently.
Description
This listing is for a 2 pack of 3D Printer Beds made from tempered glass. The tempered glass is of superior quality to typical borosilicate plates
provided by our competitors. The tempered glass is totally flat and smooth, with no dips or pits. Tempered glass is more durable and lasts longer
than borosilicate, so you need to replace the plates less frequently.
Unlike our competitors, you won’t have to purchase low quality black binder clips to secure the plates. We provide 8 printer bed clips that maximize
your build area and look great.
Key Product Features:
- Made from high quality tempered glass.
- Are you looking for an Ender 3 Upgrade? Perfectly fits the Ender 3, Ender 3 Pro, Ender 3X, Ender 5, CR-20, Geeetech A10, and CR-20 Pro at
235 x 235 x 40 mm. - Totally flat surface to avoid any adhesion or print quality issues.
- Packed in custom foam to avoid any damage during delivery.
- 8 custom printer bed clips included.
How to Calibrate Your New 3D Printers Glass Bed
- Load the glass plate into the 3D printer base and attach with the silver clips provided.
- Center both the bed and nozzle.
- Lower the nozzle until it touches the top of the glass bed.
- Readjust the Z axis homing switch.
- Loosen the switches and reposition.
- Tighten up the switches when correctly aligned.
- Carry out a print calibration check to re-adjust the bed.
6. Glass Printer Bed 235x235x4.0mm Borosilicate Glass 3D Printer Glass Print Platforms for Ender 5/Ender 3/Ender 3 Pro
Feature
- 【Borosilicate Glass】This material has Ultra-low thermal expansion,heat resistant and high temperature shock resistance.Thick 4.0mm glass plate will not warp or bend under heat.
- 【Worked Perfectly】This Printer Glass bed is amazingly flat.Smooth flat surface improves the quality of your 3D printing, for consistent results.
- 【Easy to Clean】Just wash it off with water, clean with glass print bed cleaner, reapply a thin layer 3d printing solid glue and enjoy.
- 【High Quality】 Square printer glass are safe and easy to handle.All edges have a nice smooth round over and there are no chips or scratches.Fits for the Creality Ender 3, Ender 3X，Ender 3 Pro, Ender 5,Geeetech A10,DC-01，CR-20，CR-20 Pro.
- 【12 Months Warranty】100% Dcreate Genuine Brand New – Original packaging, premium quality. 100% hassle-free replacement guarantee within 12 months warranty and replacement for quality issue.
Description
Welcome to DCSW 3D printer store,Hope you have a great shopping experience!Any questions,feel free to contact we customer service,we will help you within 24 hrs!
Glass Print bed Advantages:
Glass Print bed is a universal print surface for 3D Printing. Almost all types of filament will print toglass in one way or another. Just place the Glass Print bed on your print board and clip it in place!To print with PLA or ABS , lightly spray the surface of the glass with 3d printing special solid glue,then install the Glass Print bed with glass clip. This glass has been specially ordered and modified for use in 3D Printers.
If you want to make your printing platform flat enough, ideal stuff is glass sheet. Borosilicate glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, borosilicate glass will quell your frustrations.
Features:
1.Resistant to thermal shock compared to regular glass.
2.Prepare a second plate and quickly switchplates when a model finishes printing. This significantly reduces printer idle time between prints.
3.Reduces warping, however platform has to be properly leveled as is the case with any platform on a 3D printer.
Note:
1.The glass can be used normally at 520 degree temperature.
2.You need to adjust the Z axis limit switch up and down when installing.
3.Apply some 3d printing solid glue on the glass surface on before printing.
4. The Glass Print Bed’s thickness of 4.0mm is within the normal range.
7. Artillery Sidewinder X1 SW-X1 3D Printer
Feature
- Expandable filament holder, support 0.5-3kg filament roll.Easy assembly, come 95% pre-assembled.
- FFC cabling system, tidy, good looking.Synchronized Dual Z System, stabler X axis, always level on both ends.
- Direct Drive Extruder with Volcano nozzle, better control over fast extrusion.
- AC heated glass build platform, faster heating, 80C in 80 seconds, 110C in 130 seconds.
- Exclusive ultra-quiet stepper drivers.Patent pending Z nut coupler, smoother Z movements.
Description
Technical Specification:
Layer Resolution:0.1mm
Frame:Aluminum Extrusion
XYZ Positioning Accuracy:0.05mm, 0.05mm, 0.1mm
Printing Filament : PLA, ABS, TPU, Flexible Materials
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm
Machine Dimensions: 550 x 405 x 640 mm,550 x 405 x 870 mm (with spool holder),21.65 x 15.94 x 25.20 in,21.65 x 15.94 x 34.25 in (with spool holder)
Shipping Box Dimensions: 780 x 540 x 250 mm,30.71 x 21.26 x 9.84 in
Machine Weight: 14kg
Shipping Weight:16.5kg
Maximum Print Speed:150 mm/s
Maximum Travel Speed:250mm/s
Build Volume:300 x 300 x 400 mm,11.81 x 11.81 x 15.75 in
Extruder Type: Titan Extruder (Direct Drive)
Maximum Build Plate Temperature:130C
Power Requirement: 110V – 240V 600W max (with heated bed turned on)
Connectivity: USB, TF Card, USB Stick
Control Board:MKS Gen L
Nozzle Type: Volcano
Special Feature:
Exclusive Ultra-Quiet Stepper Driver
Synchronized Dual Z System
Direct Drive Extruder,Filament Runout Detection and Recovery
Power Loss Detection and Recovery
Rapid Heating AC Heat Bed
Touch Screen Control
8. Athorbot 3D Printing Build Surface, Black (Pack of 3) (310mm X 310mm) for CR-10 CR-10S 3D printer
Feature
- [EASY TO INSTALL]：Applying it was super simple, just peel and stick，and no bubbles, print adheres well
- [EASY TO REMOVE]: take off easily and cleanly.
- [FULLY COMPATIBLY] 3D Printing build surface durable construction allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments.
- [REUSE & CUTTABLE] The 3D-printing build surface is a 310 x 310mm square sheet, reuse for multiple prints, just wipe down with is opropyl alcohol between prints for best results. This sheets can be cut down to desired size by scoring with a utility knife.
- [SERVICE COMMITMENTS]: We offer 90 Days Money Back Warranty. If you unsatisfied with the quality of our product, you can contact us with your complaints and 100% get your money back.
Description
The 3D build surface is very easy to install and remove, Compatible with multiple printer, you can reuse it many times and cut it what you want, We support 100% dissatisfied returns or refund ,you can contact us.
[HOW TO REMOVE THE RESULTS OF BUILD SURFACE FROM HEAT PLATE] :
3D Printer heat the bed to 50~60 Celcius, then use a putty knife or print removal tool gently work blade along edges, then you can easy to remove it.
Finally wipe with acetone or alcohol after the bed/glass cools back down.
Please be careful not to scald your hands.
Size: 310 X 310mm (12×12″).
Color: Black.
Package includes:
3* 3D Printing Build Surface
NOTE:
3D Printer build surface can be suitable for temperature from 80 to 100 Celcius.
Maximal temperature: 200℃
3D Printer build sheet adheres to a print bed to help the filament stick during printing, it is easy to take off the models.
Compatible with most 3D printers and most of surface.
you can cut it to any size you want.
9. Creality 3D 24V Aluminum Heated Bed Hot Bed Kit with Installed Cable for CR-10S Pro,CR-X Creality 3D Printer,310 x 320 x 3mm
Description
Features:
.Size: 310 x 320 x 3mm
.Voltage: 24V
.Power: 220W
.Product Process: Aluminum Substrate
.Type: Integrated Circuit
.Suitable for: CR-10S PRO / CR-X
Specifications:
.Material: Hard Aluminum Plate
.Product Weight: 911g
10. Creativity mk2a 310x310x3MM 24V Aluminum Heated Bed PCB Heatbed Platform for CR-10S Heated DIY 3DPrinter 250W+ Wiring
Feature
- Heating Much Faster and with 12V Voltage 18A 220W
- Original Parts / Accessories Replacement for Creality 3D Printer CR-10 / CR-10S / CR-10 S5
- Hot Bed Size:310x310x3mm
- Hotbed With Cable Which be Installed Well and Hot bed insulation cotton
- All 3D printer accessories with 12 Months Warranty and Lifetime Technical Support.
Description
Description of heated bed:
1. Product voltage and power: 24V 240W resistance 2.4 ohm
2. Product Power: 240W
3. Product size: 310mm * 310mm * 3mm
4. Hole spacing: 240mm * 240mm
5. Product Process: Aluminum Plate
6. Product color: black on the back and silver on the front
7. Product thickness: 3mm
8. Product applicable screws: M4 screws
9. Thermistor: 3950 100K positive and negative 1% detection accuracy.
Features of heated beds:
1, the whole sheet metal process, the cost is much higher than the tin plate.
2. The entire board is optically shorted and open.
3. The heating table is integrated with the aluminum substrate, and the temperature stability is better.
4, the new circuit, the power supply is stable.
5. The aluminum MK2 MK3 heated bed is an updated version of MK2B and MK2A.
Heating bed cable description:
1. Project type: hotbed line for 3d printer
2. Length: 90cm
Applies to: All CR-10 3D printers.
Features of heated bed cables:
1. Additional positive and negative leads to the use of all heating pins and reduce the load
2. Silicone stranded wire for better flexibility and wear resistance
Note: CR-10 3D printer heater supports 24V power supply
Package includes:
1 * 3d printer heating bed 310mm x310mm * 3mm
1 * 90cm hotbed cable
1 * Hot bed insulation cotton
Conclusion
By our suggestions above, we hope that you can found Heating Bed 3D Printer 400X400 for you.Please don’t forget to share your experience by comment in this post. Thank you!
