965 reviews analysed
1. GE WR72X239 Left Crisper Drawer Glide for Refrigerator
Description
Product description
Genuine Original Equipment Manufacturer (OEM) parts! This crisper drawer slide rail (part number WR72X239) is for refrigerators. Crisper drawer slide rail WR72X239 supports the crisper drawer as the drawer slides in and out. Wear work gloves to protect your hands when installing this part. For Kenmore & Hotpoint.
From the Manufacturer
Left Crisper Drawer Glide. This General Electric WR72X239 drawer slide rail assembly works with many GE, Hotpoint, Kenmore and RCA refrigerators. The color of this part is white. This part also works with the following models: General Electric BSS25JFRJWW, Maytag CSG900, Maytag CSG9000BAE, Maytag CSG9000CAB, Maytag CSGA400AAL, General Electric CSK20GAAAAD, General Electric CSK22GABAAD, General Electric CSK22GAXBAD, General Electric CSK24GRXAAD, General Electric CSK25GRZBAA.
2. Gobrico 22-Inch Heavy Duty 100 Lb. Full Extension Ball Bearing Drawer Slides Soft Close Rail Runners 1Pair
Feature
- Mounting:Side Mount, Material:Cold Rolled Steel,Finished Color:Zinc Plated
- Length:22inch,Thickness:1/2″(12.7mm),Width:45mm.Load capacity:78 Pounds/35KG
- Ultra smooth soft-close function. Continuous bearings ensure smooth and quiet performance
- 2 drawer slides(=1 pair),screws included.Rear-mounted brackets NOT included
- For any quality problem,we will refund or send replacement.Please contact us through message
3. GE WR72X242 Right Crisper Drawer Glide for Refrigerator
Description
Product description
OEM Factory Part. WR72X242
From the Manufacturer
Right Crisper Drawer Glide. This part works with the following models: General Electric BSS25JFRJWW, General Electric CSK30DRBAAA, General Electric CSK30DRZDAA, Amana CSNAC700, Whirlpool CSP2760AN1, Whirlpool CSP2760AW0, Whirlpool CSP2760AW1, General Electric GSH25JFTBBB, General Electric GSH25JSXASS, General Electric GSH25JSXBSS.
4. Prime-Line R 7210 Drawer Slide Kit – Replace Drawer Track Hardware – Self-Closing Design –Fits Most Bottom/ Side-Mounted Drawer Systems –15-3/4” Steel Tracks, Plastic Wheels, White 1 Pair (2 LH, 2 RH)
Feature
- INSTALL OR REPLACE DRAWER TRACK HARDWARE – Whether you are installing new drawers or repairing one that won’t open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers.
- SELF-CLOSING DESIGN – The smooth-gliding tracks in the Prime-Line R 7210 kit features a self-closing design that commences at the final 2-1/2” from the end of the 15-3/4” long tracks when closing.
- EASY TO INSTALL – Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line’s website.
- 75 LBS MAX LOAD CAPACITY – The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 16” deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks.
- INSTALLATION TIP – The clearance required between the drawer and the drawer opening for these slides is: 1/2” on left and right sides, 1/4” at the bottom and 5/8” at the top.
Description
Why struggle with a drawer that won’t open or close properly when you can simply replace the slides? Whether you need to replace damaged or missing slides or are installing them new for the first time, Prime-Line R 7210 Drawer Slide Kit fits most bottom/side-mounted drawer systems and is for use in 16” deep drawer cabinets. These bottom mount drawer slides can be installed in drawer cabinets with face frames and without.
The drawer slide kit is constructed of steel tracks with a white powder coated finish, self-lubricating plastic rollers and a self-closing design that commences at the final 2-1/2” from the end of the 15-3/4” long tracks when closing. With a maximum load capacity of 75 lbs., the drawer slide set is sturdy and can hold up to years of repeated use. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks. Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line’s website.
Installation Tip: The clearance required between the drawer and the drawer opening for these slides is: 1/2” on left and right sides, 1/4” at the bottom and 5/8” at the top
Note: This kit cannot be cut down to fit smaller drawer depths as it is designed with a positive stop at the ends of the fixed tracks, and because the rear rollers (11/16” diameter wheels) on the sliding tracks are fastened to the ends of the drawer-mounted track pieces.
5. Zengest Full Extension Less Noise Ball Bearing Drawer Slides, 12", 1-Pair
Description
Features Solid steel bearing shaft, no noise during opening and closing. Slide material thicker, bearing 100 pounds, material plating products, will not rust. Internal rail separation is simple and easy to install. Use on bedroom furniture, sliding cabinet doors, office cabinets and bathroom cabinets. Size selection, slide length less than or equal to drawer depth minus 4 mm.
6. Joomen CNC SBR12-600mm LINEAR SLIDE GUIDE 2 RAIL+ 4 SBR12UU BEARING BLOCK
Description
2x SBR12 Linear Slide Guide Rails with Supported Mounts
12mm diameter, 600mm length
4x SBR12UU Linear Slide Open Bearing Blocks
7. GE WR30X10093 Refrigerator Icemaker Kit
Description
Product description
Genuine Original Equipment Manufacturer (OEM) parts! This ice maker kit (part number WR30X10093) is for refrigerators. Ice maker kit WR30X10093 is for refrigerators that didn’t originally come with an ice maker. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands. For Hotpoint.
From the Manufacturer
General Electric WR30X10093 Refrigerator Icemaker Kit includes power cords and an end-mounted fill cup. Works with GE, Hotpoint and many other refrigerator brands.
8. GE WR62X10055 Solenoid Assembly for Refrigerator
Description
Product description
Genuine Original Equipment Manufacturer (OEM) parts! This dispenser ice chute door solenoid (part number WR62X10055) is for refrigerators. Dispenser ice chute door solenoid WR62X10055 opens and closes the ice chute door on the ice dispenser. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands. For Hotpoint, Ge Americana, & Rca.
From the Manufacturer
Solenoid Assembly. This part works with the following models: General Electric BSS25JFRJWW, General Electric BSY25GFMWW, General Electric CSS25USWASS, General Electric CSS25USWCSS, General Electric GSF25XGWABB, General Electric CSCP5UGXSS, General Electric CSHS5UGXSS, General Electric GSCF3PGXBB, General Electric GSCF3PGXWW, General Electric GSCS3KGYSS, General Electric GSCS3PGXSS.
Conclusion
By our suggestions above, we hope that you can found Ge Gsh25jsdd Ss Crisper Drawer Slide Rail for you.Please don’t forget to share your experience by comment in this post. Thank you!
