Finding your suitable readers for brasscraft appliance connector is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for brasscraft appliance connector including detail information and customer reviews. Let’s find out which is your favorite one.
623 reviews analysed
1. BrassCraft CSSD114R-72 X Gas Appliance Connector
Feature
- 3/8 In. ID (1/2 In. OD) x 72 In. corrugated stainless steel with corrosion resistant coating
- Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions – 3/8 In. Female Flare or 1/2 In. MIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
2. BrassCraft CSSC54-72 P 1/2-Inch FIP x 1/2-Inch MIP x 72-Inch ProCoat Gas Appliance Connector, 5/8-Inch, OD 86,000 BTU
Feature
- 5/8 In. OD with 15/16-16 Thread x 72 In. stainless steel connector w/corrosion resistant coating
- 1/2 In. FIP and 1/2 In. MIP steel gas fittings
- 86,000 BTU max flow capacity. Use with natural or LP (propane) gas
- Temperature rating: -40 to 150 Degrees F. Pressure rating: 1/2 psi maximum
- 100% leak tested. Approved for indoor and outdoor use. CSA certified
Description
Product Description
Brass Craft’s 1/2 In. FIP x 1/2 In. MIP x 72 In. Recoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 86,000 BTU’s. This Recoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. Recoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the Recoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
From the Manufacturer
BrassCraft’s 1/2 In. FIP x 1/2 In. MIP x 72 In. ProCoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 86,000 BTU’s. This ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
3. BrassCraft CSSC45R-36 P Gas Appliance Connector
Feature
- 1/2 In. ID (5/8 In. OD) x 36 In. corrugated stainless steel with corrosion resistant coating
- Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions – 1/2 In. MIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 1/2 In. MIP EFV x 1/2 In. FIP x 36 In. Safety+PLUS Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) with a maximum operating capacity of 125,000 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
4. BrassCraft CSSC22-48 P 3/4-Inch FIP x 3/4-Inch FIP x 48-Inch ProCoat Gas Appliance Connector, 5/8-Inch, OD 106,000 BTU
Feature
- N/A
- Made in US
- 5/8 In. OD with 15/16-16 Thread x 48 In. stainless steel connector w/corrosion resistant coating
- (2) 3/4 In. FIP steel gas fittings
- 106,000 BTU max flow capacity. Use with natural or LP (propane) gas
- Temperature rating: -40 to 150 Degrees F. Pressure rating: 1/2 psi maximum
- 100% leak tested. Approved for indoor and outdoor use. CSA certified
Description
Product Description
Brass Craft’s 3/4 In. FIP x 3/4 In. FIP x 48 In. Recoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 106,000 BTU’s. This Recoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. Recoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the Recoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
From the Manufacturer
BrassCraft’s 3/4 In. FIP x 3/4 In. FIP x 48 In. ProCoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 106,000 BTU’s. This ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
5. BRASS CRAFT CSSD54-24 1/2" MIP/FIP x 24" ProCoat Stainless Steel Straight Gas Connector with Fittings, 1/2" x 24" L
Description
This product is for indoor and outdoor use. It works effectively and is convenient to use as well. It is definitely a great quality product.
6. BrassCraft CSSD45R-48 P Safety PLUS Gas Appliance 1/2" OD Connector with 1/2" MIP EFV x 1/2" FIP x 48"
Feature
- 3/8 in. Id (1/2 in. Od) x 48 in. Corrugated stainless steel with corrosion resistant coating
- Safety+plus excess flow valve helps protect against gas fires and explosions – 1/2 in. Mip connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% leak tested
- Use with natural, manufactured, mixed and liquefied petroleum (lp or propane) gases and lp gas-air mixtures
- Csa certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 1/2 in. Mip efv x 1/2 in. Fip x 48 in. Safety+plus gas appliance connector is 1/2 in. Od (3/8 in. Id) with a maximum operating capacity of 60,500 btu’s. This safety+plus gas connector combines excess flow technology with the advanced corrosion resistance of procoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the safety+plus valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. Procoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the procoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
7. Brasscraft CSSL54-60 ProCoat Straight Connector Gas Dryer & Water Heater Flex-Line (3/8" OD FIP x 1/2" MIP) x 60"
Feature
- Manufactured in China
- Easy to use
- Highly durable
- Corrosion Resistant Coating Protects From Exposure To Harsh Cleaning and Plumbing Repair Products
- Stainless Steel Construction
- Ranges, Water Heaters and Cooktops Up To 24,900 Btu
- 100-Percent Leak Tested
- Approved For Lp (propane) and Natural Gas
8. BrassCraft CSSC12R-72 P Gas Appliance Connector
Feature
- 1/2 In. ID (5/8 In. OD) x 72 In. corrugated stainless steel with corrosion resistant coating
- Safety PLUS Excess Flow Valve helps protect against gas fires and explosions – 3/4 In. MIP (with 1/2 In. FIP tap) connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 3/4 In. MIP EFV (1/2 I. FIP tap) x 3/4 In. FIP x 72 In. Safety PLUS Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) with a maximum operating capacity of 86,000 BTU’s. This Safety PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
9. BrassCraft CSSC22R-60 P Safety PLUS Gas Appliance Connector with 5/8" OD EFV and 3/4" FIP x 3/4" FIP x 60"
Feature
- 1/2 In. ID (5/8 In. OD) x 60 In. corrugated stainless steel with corrosion resistant coating
- Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions – 3/4 In. FIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 3/4 In. FIP EFV x 3/4 In. FIP x 60 In. Safety+PLUS Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) with a maximum operating capacity of 93,200 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
10. BrassCraft CSSD45R-60 P Gas Appliance Connector
Feature
- 3/8 in. Id (1/2 in. Od) x 60 in. Corrugated stainless steel with corrosion resistant coating
- Safety+plus excess flow valve helps protect against gas fires and explosions – 1/2 in. Mip connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% leak tested
- Use with natural, manufactured, mixed and liquefied petroleum (lp or propane) gases and lp gas-air mixtures
- Csa certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 1/2 in. Mip efv x 1/2 in. Fip x 60 in. Safety+plus gas appliance connector is 1/2 in. Od (3/8 in. Id) with a maximum operating capacity of 53,200 btu’s. This safety+plus gas connector combines excess flow technology with the advanced corrosion resistance of procoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the safety+plus valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. Procoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the procoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
Conclusion
By our suggestions above, we hope that you can found Brasscraft Appliance Connector for you.Please don’t forget to share your experience by comment in this post. Thank you!