775 reviews analysed
1. Siemens Q23040CT2 30-Amp Double Pole/40-Amp Double Pole 10-Kaic Circuit Breaker
2. SIEMENS Q1520 Parallax Power Components ITEQ1520 15/20A Duplex Circuit Breaker 15/20 amp
Description
Product Description
Siemens space saving, plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. The duplex breakers provide two single pole breakers in the space typically required for only one standard breaker. These duplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.
From the Manufacturer
Siemens space saving, plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. The duplex breakers provide two single pole breakers in the space typically required for only one standard breaker. These duplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces.
3. Q220 20-Amp Double Pole Type QP Circuit Breaker
Feature
- na
- Imported
- Double pole, 20 Amp, 240V type QP Circuit Breaker
- 10,000 AIC interrupting rating
- Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
- Compatible with Siemens PL and ES series load centers
- Use for overload and short-circuit protection of your electrical system
Description
Product Description
Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.
From the Manufacturer
Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.
4. Siemens Q2020 Two 20-Amp Single Pole 120-Volt Circuit Breakers, for use only where Type QT breakers are allowed
Description
Product Description
Siemens Q2020 Two 20-Amp Single Pole 120-Volt Circuit Breakers, for use only where Type QT breakers are allowed
From the Manufacturer
Siemens space saving, plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. The duplex breakers provide two single pole breakers in the space typically required for only one standard breaker. These duplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces.
5. UBIP120-New Pushmatic P120 Replacement. One Pole 20 Amp Circuit Breaker Manufactured by Connecticut Electric.
Feature
- Replacement Pushmatic circuit breaker manufactured new by Connecticut Electric
- For use in Pushmatic circuit breaker panels
- Intertek ETL Listing to UL Standard 489 for US and Canada-Molded case circuit breakers
- 10,000 AIC
- 20 Amp
- 120 VAC 1 Pole breaker
- Bolt on type
- May also be branded as Bulldog (ie Bulldog P120)
Description
Product Description
Connecticut Electric manufactures new high quality replacement circuit breakers for Pushmatic load center that accept Pushmatic style circuit breakers. Circuit breakers should only be replaced with new tested and Safety Agency Listed circuit breakers, never used or refurbished ones.
From the Manufacturer
This 120-Volt ITE pushmatic 20 amp, single pole replacement circuit breaker is used in a pushmatic load center. Typical applications, up to 2,200-Watt, include kitchen circuits, branch circuits, wall receptacles, electric heaters (up to 1,650-Watt), dishwashers, refrigerators, freezers, washing machines, window air conditioners (110-Volt, up to 5,500 BTU) and electric motors (3/4-to-1-1/4-Horsepower). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.
6. Siemens Q1515 Two 15-Amp Single Pole 120-Volt Circuit Breakers, for use only where Type QT breakers are allowed
Description
Product Description
Item/Siemens, 15a/15a Duplex circuit breaker, 2 independent poles, 2-15a single pole breakers, 1/2 inch per pole, 120V bulk.
From the Manufacturer
Siemens space saving, plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. The duplex breakers provide two single pole breakers in the space typically required for only one standard breaker. These duplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces.
7. MURRAY MP2020 Two 20-Amp Single Pole 120-Volt Circuit Breaker
8. UBIP230-New PushmaticP230 Replacement.Two Pole 30 Amp Circuit Breaker Manufactured by Connecticut Electric.
Feature
- Replacement Pushmatic circuit breaker manufactured new by Connecticut Electric
- For use in Pushmatic circuit breaker panels
- Intertek ETL Listing to UL Standard 489 for US and Canada-Molded case circuit breakers
- 10,000 AIC
- 30 Amp
- 120/240 VAC 2 Pole breaker
- Bolt on type
- May also be branded as Bulldog (ie Bulldog P230)
9. MURRAY MP1515 Two 15-Amp Single Pole 120-Volt Circuit Breaker
Description
Product Description
Murray space saving, plug in circuit breakers are intended for use in Murray load centers and meter combinations that are rated to accept type MH-T breakers. Check wiring diagram to confirm. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required. The duplex breakers provide two single pole breakers in the space typically required for only one standard breaker. These duplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces. Murray strongly recommends against the use of “used” breakers. The installation of used breakers in a Murray panel will void the warranty on the panel. Murray does not sell used breakers and has not approved any 3rd party sellers to do so.Please note MH-T is the breaker type and MP1515 is the model number.
From the Manufacturer
Murray space saving, plug in circuit breakers are intended for use in Murray load centers and meter combinations that are rated to accept type MH-T breakers. Check wiring diagram to confirm. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required. The duplex breakers provide two single pole breakers in the space typically required for only one standard breaker. These duplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces.
10. MP115 15-Amp Single Pole Type MP-T Circuit Breaker
Feature
- Single pole, 15 Amp, 120V type MP-T Circuit Breaker
- 10,000 AIC interrupting rating
- Murray type MP-T circuit breakers provide easy plug-in connections in Murray enclosures and the time saving insta-wire feature
- Compatible with Murray rock solid load centers
- Use for overload and short-circuit protection of your electrical system
Description
Product Description
Murray offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Murray offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. Murray strongly recommends against the use of “used” breakers. The installation of used breakers in a Murray panel will void the warranty on the panel. Murray does not sell used breakers and has not approved any 3rd party sellers to do so.
From the Manufacturer
Murray plug in circuit breakers are intended for use in Murray load centers or meter combinations. The single pole Murray breakers may be used in single or 3-phase load centers and are 120V rated. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required.
Conclusion
By our suggestions above, we hope that you can found 1520 Ge Circuit Breaker for you.Please don’t forget to share your experience by comment in this post. Thank you!
