The Best 18 Inch Plastic Vacuum Line

1/8″ Diameter Black Color Rubber Vacuum Caps

Saint-Gobain has developed Tygon E-3603 using entirely bio-based plasticizers. Crystal clear and flexible, long-lasting and crack-resistant, the new Tygon E-3603 non-DEHP tubing delivers the same superior performance you have come to expect, but now in a formulation that contains a non-DEHP plasticizer. Replacing DEHP with a bio-based, non-phthalate plasticizer delivers the benefits of increased sustainability and safety for the environment and users. Tygon E-3603 Tubing handles most inorganic chemicals found in the laboratory. It is non-oxidizing and non-contaminating, and less permeable than rubber tubing. The glassy-smooth inner bore helps prevent buildup to facilitate cleaning, and coils are marked at 1-foot (30.4-centimeters) intervals for easy measuring. Tygon E-3603 Tubing is specially formulated for resistance to flex-fatigue and abrasion. In many peristaltic pump applications it will outlast the competitor and the original R-3603 by 3 to 1. As a tubing for instrumentation connection, vent, drain and other general laboratory applications, Tygon E-3603 Tubing offers superior life, which minimizes the labor and expense of replacement. New bio-based formulation delivers the same excellent performance. Outstanding chemical resistance. Lot-to-lot consistency for reproducible results. Non-oxidizing and non-contaminating. Contains no BPA or phthalates. Smooth, polished inner wall. Slips easily over fittings and grips securely for simple lab set-ups. Meets USP Class VI and FDA criteria. Typical applications: general laboratory, food and beverage, biopharmaceutical, analytical instruments, peristaltic and vacuum pumps, ideal for condensers, incubators, desiccators, gas lines and drain lines. 56 Durometer hardness (Shore A), 15s. 1750 psi (12.1MPa) Tensile strength. 425 percent ultimate elongation. Tear resistance, 173 pounds-feet/inch (31 kN/m). 1.21 Specific gravity. Water absorption, 0.21 percent 24 hrs. at 73 degrees F (23 degrees C).

Size: 3 mm / 1/8 inch ID; 5 mm / 3/16 inch OD; 10 feet length, black

Saint-Gobain has developed Tygon E-3603 using entirely bio-based plasticizers. Crystal clear and flexible, long-lasting and crack-resistant, the new Tygon E-3603 non-DEHP tubing delivers the same superior performance you have come to expect, but now in a formulation that contains a non-DEHP plasticizer. Replacing DEHP with a bio-based, non-phthalate plasticizer delivers the benefits of increased sustainability and safety for the environment and users. Tygon E-3603 Tubing handles most inorganic chemicals found in the laboratory. It is non-oxidizing and non-contaminating, and less permeable than rubber tubing. The glassy-smooth inner bore helps prevent buildup to facilitate cleaning, and coils are marked at 1-foot (30.4-centimeters) intervals for easy measuring. Tygon E-3603 Tubing is specially formulated for resistance to flex-fatigue and abrasion. In many peristaltic pump applications it will outlast the competitor and the original R-3603 by 3 to 1. As a tubing for instrumentation connection, vent, drain and other general laboratory applications, Tygon E-3603 Tubing offers superior life, which minimizes the labor and expense of replacement. New bio-based formulation delivers the same excellent performance. Outstanding chemical resistance. Lot-to-lot consistency for reproducible results. Non-oxidizing and non-contaminating. Contains no BPA or phthalates. Smooth, polished inner wall. Slips easily over fittings and grips securely for simple lab set-ups. Meets USP Class VI and FDA criteria. Typical applications: general laboratory, food and beverage, biopharmaceutical, analytical instruments, peristaltic and vacuum pumps, ideal for condensers, incubators, desiccators, gas lines and drain lines. 56 Durometer hardness (Shore A), 15s. 1750 psi (12.1MPa) Tensile strength. 425 percent ultimate elongation. Tear resistance, 173 pounds-feet/inch (31 kN/m). 1.21 Specific gravity. Water absorption, 0.21 percent 24 hrs. at 73 degrees F (23 degrees C).

Products Features 

* Constructed from forged brass 

* All Nigo’s products conform to specifications ASTM (American Society for Testing and Materials) B124 and B16

* NPT threads on all Nigo’s products meet ASME B1.20.1

* Designed for use in air, water, oil, nature, manufactured, mixed, liquefied petroleum or propane and LP Gas-Air

* 1/8” Barbed fitting has three openings for connecting your 1/8” ID hoses  

* Temperatures range from -40 to 160 F

* Max. Pressure: 150 PSI WOG

* Connections: Hose Barb x Hose Barb x Hose Barb

 About Us

Nigo Industrial Co,. Ltd manufactures a wide variety of valves and pipe fittings. The company meets international organization for standardization ISO 9001:2008 Quality Management System standard.

Legines barb tee is made of solid brass and connects three lengths of hose in a branch tee. Barbed fittings create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).
This fitting is for a fixed connection between plastic or rubber hose. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The fitting has a temperature range of -40 to 160 degrees F.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability.
Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).