896 reviews analysed
1. 12"w X 4"h 3-Way AIR SUPPLY GRILLE – DUCT COVER & DIFFUSER – Flat Stamped Face – White [Outer Dimensions: 13.75"w X 5.75"h]
Feature
- 12″w X 4″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 13.75″w X 5.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Solid Stamped Steel Construction, No Scuff Powder Coat Durable Finish, No Sharp Edges, 2 Recessed Screw Holes On Each Side with Screws Included, EASY INSTALLATION
- LOUVERED Supply Grille for Sidewall or Ceiling Application with SmoothGlide Technology, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet Lever
- QUALITY PACKAGING – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- Easy Unrestricted Air Flow Deflection For Your HVAC System – 1/2 Inch Spaced Fins
Description
HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors, DIY projects,
and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project look no further than HVAC Premium.
We have the largest selection of Grilles Registers & Diffusers.
HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!
12″w X 4″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 13.75″w X 5.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
How To Measure A Register Grille:
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.
Height vs Width
The first number in a register grille size represents the width, the second number represents the height.
Example: If your duct opening is 14″ wide by 20″ tall, order a 14×20.
This solid stamped steel register vent grille will provide your home with ideal and quiet, rattle free airflow and ventilation for your air-conditioning and heating system
as well as smooth opening and closing back dampers. The back dampers are adjusted by the lever at the front of the register so that you can easily control the air flow
of your HVAC system. You can install this register supply grille on the ceiling or on the sidewall. The installation is simple, just screw the grille on to
your wall with the screws that are included and that’s it!
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
2. Rocky Mountain Goods Floor Register 4X12(Duct Opening Measurements) – Heavy Duty Walkable Register – Premium Finish – Easy Adjust air Supply Lever – 4 inch by 12 Inch Floor Vent (White)
Description
Rocky Mountain Goods Floor Register 4X12 is a premium finish floor register perfect for the 4 X 12 inch HVAC. The heavy duty construction design allows for walk on use. Made with a premium finish this floor register is paint chip and scratch resistant keeping the register looking brand new. For changing air flow, the easy adjust air supply lever allows for quick opening and closing of the air or heating vent. Rocky Mountain Goods Floor Register 4” by 12” comes with a lifetime warranty.
3. Accord ABSWWH2124 Sidewall/Ceiling Register with 2-Way Design, 12-Inch x 4-Inch(Duct Opening Measurements), White
Feature
- Steel construction for sidewall or ceiling application
- 1/2-in spaced fins
- Two-way air deflection with a multi-shutter damper
- The number of louvered columns and mounting holes will vary based on the size of the grille ordered
- Listed product sizes refer to the duct opening measurements, not the register itself
Description
Accord Ventilation model ABSWWH2124 is a white, 12-Inch x 4-Inch(Duct Opening Measurements), sidewall/ceiling register with a 2-way design. To determine the correct size to order, measure the size of the duct opening (not the old vent itself). Each Accord Ventilation product is crafted using high quality materials that provide strength and durability. Accord Ventilation produces floor registers, grates, and vents in a variety of designs and sizes. Accord Ventilation products are sure to enhance any home decor. Our Lifetime Limited Warranty covers every floor register, vent, grate, and grille manufactured by Accord Ventilation.
4. 12"w X 4"h Adjustable AIR Supply Diffuser – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – Black [Outer Dimensions: 13.75"w X 5.75"h]
Feature
- 12″w X 4″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 13.75″w X 5.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Steel Construction, No Scuff Powder Coat Durable Finish, Smooth, Shiny, Scratch-Resistant, No Sharp Edges, 2 Recessed Screw Holes On Each Side with Screws Included, Screws Same Color As Vent Cover, EASY INSTALLATION
- LOUVERED Adjustable Register Grille for Sidewall or Ceiling Application, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet and Smooth Control Lever, Noise Free Components
- QUALITY PACKAGING – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- EACH INDIVIDUAL FIN IS ADJUSTABLE FOR MAX AIRFLOW CONTROL – Adjust The Fins To Open or Close From the Front – Easy Unrestricted Air Flow Deflection For Your HVAC System
Description
12″w X 4″h ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – Black [Outer Dimensions: 13.75″w X 5.75″h]
12″w X 4″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 13.75″w X 5.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″” at the width, and + 2″” at the height.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
5. Decor Grates AJH410-NKL Floor Register, 4 x 10, Nickel
Feature
- Oriental steel plated – Brushed Nickel Finish floor register
- Easy to install – Just drop into vent – no tools required
- Metal damper boxes rust and seize up, so we make our damper boxes with high impact plastic. This is not a cheaper option, it’s the best option
- Available in a variety of styles and finishes to match any decor
- Filter retainer and filter are sold separately
6. Accord ABFRWH410 Floor Register with Louvered Design, 4-Inch x 10-Inch(Duct Opening Measurements), White
Description
Accord Ventilation model ABFRWH410 is a white, 4-Inch x 10-Inch(Duct Opening Measurements), floor register with a louvered design. To determine the correct size to order, measure the size of the duct opening (not the old vent itself). Each Accord Ventilation product is crafted using high quality materials that provide strength and durability. Accord Ventilation produces floor registers, grates, and vents in a variety of designs and sizes. Accord Ventilation products are sure to enhance any home decor. Our Lifetime Limited Warranty covers every floor register, vent, grate, and grille manufactured by Accord Ventilation.
7. Deflecto Ceiling Register, 10" x 6", (RGC106)
Feature
- 10″ x 6″ ceiling register in off-white
- Made with polypropylene material, allowing you to place in dishwasher for easy cleaning
- Mounting screws are including, giving you immediate application
- Simple, push-pull designs allows easy and convenient use
- Reliable and durable product with 5 year guarantee
Description
This plastic ceiling register designed by Deflecto comes in a trendy off-white shade that can be painted or stained to match your decor preference. Made with polypylene material, it can be placed in the dishwasher for convenient cleaning needs and will not rust. Includes mounting screws for your wall, saving you time and allowing immediate application. Product has simple, push-pull design for easy use and convenience. With a 5 year guarantee, use these reliable ceiling registers for your living space.
8. Decor Grates SPH412-NKL Floor Register, 4-Inch by 12-Inch, Brushed Nickel Finish
Feature
- Scroll Design steel plated – Brushed Nickel Finish floor register
- Easy to install – Just drop into vent – no tools required
- Metal damper boxes rust and seize up, so we make our damper boxes with high impact plastic. This is not a cheaper option, it’s the best option
- Available in a variety of styles and finishes to match any decor
- Filter retainer and filter are sold separately
Description
Product Description
This 8-pack of Decor Grates 4-Inch by 12-Inch scroll floor register has a brushed nickel finish (2mm metal). Decor Grates floor registers are built with the finest materials. Each and every register goes through a quality assurance process to ensure your satisfaction. Our classic designs will enhance any rooms decor and give you years of trouble free operation. Our family owned company takes great pride in making sure you are totally satisfied with your purchase.
From the Manufacturer
This Decor Grates 4-Inch by 12-Inch scroll floor register has a brushed nickel finish (2mm metal). Decor Grates floor registers are built with the finest materials. Each and every register goes through a quality assurance process to ensure your satisfaction. Our classic designs will enhance any rooms decor and give you years of trouble free operation. Our family owned company takes great pride in making sure you are totally satisfied with your purchase.
9. 12" x 4" – 1-Way Air Vent – Adjustable Aluminum Curved Blades – Maximum Air Flow – HVAC Grille
Feature
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- Quality Packaging – Carefully Shrink Wrapped with Cardboard Backing to Prevent Damage in Shipment
- Smooth Surface Edges – Run Your Fingers Across The Surface To Feel The Smoothness
- Screws Included – Easy Unrestricted Air Flow For Your HVAC System
- 12″ x 4″ – opening (vent hole – Neck Size) dimension – actual size is approx 2″ wider
Description
12″ x 4″ – 1-Way Air Vent – Adjustable Aluminum Curved Blades – Maximum Air Flow – HVAC GrilleWhy HVAC Premium?
You may think of grilles and registers as a generic component of the ventilation system in your house.
But they Are also the most visible representation of you air system.
With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges.Just run your finger along the edge of the top plate and you will find a smooth finished surface.
High Quality AluminumThe premium durable Aluminum will Never Rust and it will never wear through leaving the material
with an elegant, beautiful, and smooth surface, adds a luxurious touch to any home.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole”
in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall,
order a 20×14. If your hole is 14″ wide by 20″ tall,
order a 14×20.
100% Satisfaction Guaranteed
Dont worry, you’re covered by our 100% Money Back Guarantee, no questions asked. Click Add to Cart now & enjoy a new updated refreshing look of your room.
10. Truaire C103M 12X04(Duct Opening Measurements) 3-Way Supply 12-Inch by 4-Inch Sidewall or Ceiling Register Grille, White
Description
From the Manufacturer
Truaire C103M 12X04(Duct Opening Measurements) 3-Way Supply 12-Inch by 4-Inch Sidewall or Ceiling Register Grille, White
Conclusion
By our suggestions above, we hope that you can found Heating Register Ceiling 12 X 4 for you.Please don’t forget to share your experience by comment in this post. Thank you!