Top 10 Vacuum Pump For Fiberglass Vacuum Bagging

Vacuum bagging is a great method for building a better composite part. This Starter Kit contains the essential tools and hardware to let you get it started. Vacuum Bagging Hardware and Starter Kit: with Deep Vacuum pump Bagging Material, Vacuum Gauge, Vacuum Nipple and Other Hardware for a easy setup for Epoxy and the alike infiltration in Workshops VIOT model: VPD6: 2 stage High Performance Deep Vacuum Pump, 25-MICRON; 6.0 CFM, 1/2 HP 110VAC/60Hz motor. View a demo and review by a customer at: https://www.youtube.com/watch?v=eHyAhXMj8cc This Sale include: Pump, vacuum gauge with a Tee adapter, vacuum hose with a barbed adapter, bagging nipple(chuck or adapter) for a tight seal. SPECIFICATIONS OF THE PUMP: POWER SUPPLY: 110 VOLTS PUMPING RATE: 6.0 CFM POWER: 1/2 HP INTAKE PORT: 1/4 inch male SAE, and 3/8 inch Male SAE flare, include an adapter to 1/2 ACME MAX VACUUM: 25 MICRONS DIMENSIONS: 305(L) x 132(H) x 240(W) OIL CAPACITY: 450 ml WEIGHT: 28 lbs SPECIFICATIONS OF THE VACUUM GAUGE: Construction: SS case on a brass frame; Size: 2.5-inch in diameter, large face; 2.0 inch over all depth Range: from 0 to -30″ Hg or -100 kPa scales in range; Connection: straight 1/8″ NPT male brass, on back center of the gauge body; 5% accuracy on the full scale; plus a Tee adapter(1/4 X 1/4 X 1/8) to 1/4″ SAE Flare port; SPECIFICATIONS OF THE VACUUM CHUCK(NIPPLE) AND BAG SHEET: Straight solid brass structure with 1/2 multi Barbed connector to hose/tubing, no restriction with 1.6 inch over all height with matching rubber washer sealer and sealers needed for a tight connection; with matching large SS washer with bigger contact area to protect the film forming the bag With a 10 ft 1/2 ID 3/4 OD thick walled vacuum hose with 1 sheet of plastic bagging material: 6 mil thick stretchable punch resistent 60″ X 100″ Sold as one assembly unit PACKING LIST: Vacuum Pump with a Bottle of vacuum oil and Power Cord Vacuum Gauge with a Tee adapter Vacuum Gauge Chuck with 10 ft 1/2 ID vacuum hose

West System 885 Vacuum Bagging Kit A complete starter kit for repairs and small laminating projects up to 13 sq. ft. Kit includes: Venturi vacuum generator 1/4″ I.D. Vacuum Tubing (10′) Vacuum Gauge (1) Junction “T” barbs (2) Release Fabric (15 sq. ft.) Breather Fabric (15 sq. ft.) Vacuum Bag Film (15 sq. ft.) Vacuum Bag Sealant (25′) Complete kit instructions 002-150 Vacuum Bagging Techniques

The component of the release cloth is high-strength polyester fiber. The main purpose is to reduce the resin content of the product, so that the surface of the hand layup product is smoother and more beautiful.

Specification：

Material: Polyester

Structure: Plain weave

Thickness: 0.1mm

weight: 85g/m²

Heat resistance: under 170℃

Product Size:3’×32′(1m*10m)

Warp tension：Greater than 280N/CM

Latitude pull：Greater than 280 N/CM


How to use:

1. After the glass fiber cloth is brushed with resin, cover the peel ply.

2. It is best to scrape the release cloth with a scraper or the like several times to scrape off the excess resin.

3, tear off the peel ply after curing

4, so that the resin content of the product is reduced and the surface looks flat and beautiful

NOTE: This is not a release product with a release effect. The release cloth is mainly to reduce the resin content of the product. Make the product paste surface smoother and more beautiful, without excess resin accumulation.

Package included：
1×peel ply(3’×32′)

Fieldpiece VP55 – 5 CFM Vacuum Pump Fieldpiece VP55 – 5 CFM Vacuum Pump x 5 CFM, two stage vacuum pump 4 Inline Ports – 1/4, 3/8 (x2), 1/2 Change Oil Quickly, Even with the Pump Running Heavy Duty Rubberized Construction Fieldpiece is leading the charge in properly performing system evacuation with its new vacuum pumps with RunQuick Oil Change System. Available in an 8 CFM DC motor (model VP85), or in a 5 CFM AC motor (model VP55), these revolutionary pumps make evacuation easier and faster. Good oil is a key ingredient of every evacuation. Clearly view your pump oil through the huge oil reservoir window to see the condition of the oil, and the system. When it’s time to change the oil, it’s quick, clean, and easy. With the RunQuick oil change system you can replace the oil in under 20 seconds, even while the pump is running without losing vacuum. Plus the extra wide base helps prevent tipping and spilling oil. Four in-line ports give you tidy hose routing for three different size hoses. Place the cord on the handle for tangle-free storage and easy hoisting.