The Best The Office Plastic Real Door Decal

The Right line Gear Mookie Door Step provides easy access to your vehicle’s roof. Simply hook the Door Step over the u-shaped door latch in each of your vehicle’s doors. The Step is used to load and strap down car top cargo bags and boxes; canoes, kayaks, and SUPs; skis and snowboards; and bikes. Even use it to help wash your vehicle’s roof. The Step provides a comfortable platform for both feet and allows for a balanced standing position. The patented Step eliminates dirty shoes on vehicle seats and the need for step stools or ladders. If you are short or your vehicle is tall, the Mookie Door Step makes getting your gear on or off your roof a breeze!

Do you have limited mobility or are you recovering from an injury? Our mobility half step walking stepping aid is designed to help you climb steps with ease. Reduce the distance by half when stepping into a doorway or onto a stair, stoop, landing or path. Place the mobility step stool next to your bed, bathtub, car or doorway for easy entry! Made of sturdy solid wood Australia beechwood. This step assistant holds up to 500 lbs and features large drain holes for outdoor use. Measures approximately 25.5 inches long x 13 inches wide x 3 1/2 inches high.

Connect Multiple Sections For Desired Height. The Easy Chute is a lightweight, construction debris chute made from a thick, woven coated, polypropylene material, weighing only 3 pounds per 10-foot section. Each section features a multi-connection design through the use of high strength nylon strap loops, allowing you to work fast and efficiently, on any job, from the first floor to the roof! Order Easy Chute Today to make your next remodeling project Easy!

Regulating temperature in a wood-heated home can be a challenge, with distribution and movement of air being uneven. Even homes with inefficient heating or cooling sytems can benefit from increased air-flow to help with the problem. This simple unobtrusive Room to Room Circulating Fan mounted in a doorway provides a cost-effective and efficient way to remedy the situation. This single spped fan is easily reversible, if needed, with the ability to move 55 cubic feet of air/minute. It features a life-long lubricated motor designed for continuous use and an 11 foot long power cord.

Internal door ventilation grille that can be used in bathroom, toilet or storeroom door and allows free air circulation between rooms.

– Colour: white;
– Material: plastic;
– Size: 120x440mm.

Product Description

Available in a variety of indoor and outdoor window sizes, 3M Window Insulator Kits keep cold drafts out and warm air in through heat shrink window film and Scotch Window Film Mounting Tape. Quick and easy installation. 3M window kits stay up all season long with Scotch tape technology.

Amazon.com

With the 3M indoor patio door insulator kit, you can lower your heating bills during the winter and make your home more energy-efficient. Part of 3M’s line of energy-saving products, this kit includes insulation film and a roll of double-sided mounting tape to create an airtight seal. Stretching the film removes wrinkles for a transparent view. This kit enables you to insulate one patio door measuring 6 feet 8 inches by 9 feet.

Keep the Heat In and the Cold Out
Made by 3M, this indoor patio door insulator kit contains insulation film along with Scotch film tape to keep cold drafts out and warm air in. As a result, you can reduce your heating costs during the winter. The film shrinks tight around your door frame for a transparent, wrinkle-free fit and is made to reduce condensation and prevent frost build-up.

Double-Sided Mounting Tape for a Secure Seal
Included with this kit is a 1/2-inch-by-13-4/5-yard roll of 3M film mounting tape to keep your insulation in place all season long. This double-sided tape seals off cracks and crevices, creates an airtight seal, and establishes a strong bond between the surface, the tape, and the insulation film, as recommended in ENERGY STAR’s “Seal and Insulate” guidelines. Featuring a convenient, ready-to-peel liner, the tape adheres easily to a variety of surfaces and stays intact upon removal.

Simple, Fast Installation
Installing the door insulation is easy. You simply unfold the film and cut it to the width of the door frame, allowing an extra inch on all sides. Next, you firmly apply the mounting tape around the frame and remove the paper liner. Then you apply the film to the tape, starting at the top of the door, and reposition and stretch the film to remove wrinkles. Finally, you use a blow dryer to remove any remaining wrinkles, then trim any excess film.

Made in the United States, and designed for indoor use only, this insulator kit can be used with aluminum, vinyl-clad, or painted or varnished wood molding, but it should not be applied to veneer paneling or Lauan mahogany molding. The film and tape should be removed from the door at the end of the season. The film measures 7 square yards, or 7 feet by 9.3 feet by 0.75 thousandths of an inch (H x W x D), and weighs 0.24 pounds.

What’s in the Box
Insulation film and one roll of mounting tape.

See all Product description

Industry Leading Durability
Our PVC Vinyl Hang Tags are made of 15 mil thick polyvinyl chloride (PVC). Parking Permits withstand temperatures of 160°F, which is well above the average temperature reached in cars after exposure to sunlight, or greenhouse conditions. Unlike competitor tags, our Standard Write-On Parking Permit Rearview Mirror Hang Tags offer excellent water-resistance. Dirt, grease, oils and even harsh chemicals can be easily wiped away from the surface using a nonabrasive cleanser, such as Windex. Our “cut-outs” are designed to fit over a broad range of rear view mirrors, door handles, pipes, and much more. Cut-out diameter is approximately 7/8″.

USA’s Oldest Tag & Sign Manufacturer
Family owned since 1918, we take immense pride in our signage. Being one of the oldest certainly means we know this business in and out. Our South Dakota factory is the oldest manufacturer of outdoor signs in the USA. We have been an integral part of safety and convenience our tags have provided over the years.

Writeable
Easy to write on with a permanent pen or marker. The surface of the material absorbs the ink giving you a long-lasting, permanent message. Tags can be printed on laser or ink jet printers too (but testing is required). These tags cannot tolerate high temperatures associated with sublimation and thermal printing processes. The high temperatures generated will deform and distort the hang tags.

Tiger Tough Heavy Duty Airtight Peel & Stick Zipper for Dust Barrier Doors

Product Description

ZipWall Self-Adhesive Zippers allow you to quickly create a doorway in plastic dust barriers, providing easy entry and exit. Simply remove the paper backing and stick the zipper to the plastic barrier. Then open the zipper and cut the plastic to make a door. Heavy-duty zippers have a greater adhesive area that allows for an aggressive tack. Their 3” wide all-cloth construction provides maximum durability, making them ideal for high-traffic areas. Work in temperatures below 55⁰ F (12.8⁰ C). All ZipWall zippers come with flap hooks that easily hold a door flap open. ZipWall Heavy-Duty Zipper 12-Pack contains twelve zippers, twelve flap hooks and one ZipperKnife sheeting cutter. This patented knife cuts plastic sheeting and prevents edges from jamming teeth.

From the Manufacturer

The ZipWall Dust Barrier System can be set up by one person in minutes without tape, ladders or damage. Build a barrier up to 20’ high and as wide as needed using plastic sheeting or ZipFast Reusable Barrier Panels. Our complete system includes accessories to create doorways in the barrier, form tight seals at the ceiling, walls, and floor and to easily seal off doorways, larger openings, and fixtures. The ZipWall Dust Barrier System is ideal for residential and commercial contractors doing remodeling, drywall work, painting, concrete work, lead abatement, mold remediation, and more.

Use this 50 pack of reusable parking permits to keep any unwanted people out of your lot. Just write identifying information on the tag with a dry erase marker and erase it when you need to reuse. Use them for valet parking stands, hotels, restaurants and other businesses. The tags are green with a white space to write on. Since they are brightly colored it is easy to tell who belongs and who doesn’t very easily. Just hang it on your rear view mirror and you’re good to go!