The Best 5 Hp Air Compressor 20 Gallon

The CALIFORNIA AIR TOOLS 10020C Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest 2.0 Hp air compressors in the industry having only 70 decibels of sound. The Powerful “New” 2.0 HP (SP-9421) motor operates at only 1680 RPM creating less noise and less wear. The “New” SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times. The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-10020C Air Compressor has an Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 plus hours compared to other comparable air compressors with life cycles of 500 hours or less. The Oil-Free pump allows for use in a variety of temperatures (cold starts) and uneven terrains (no oil in the pump). The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for an easier start up in cold temperatures. The large 10 Gallon Steel Air Tank with wheel kit makes it very easy to move around the jobsite, shop or garage. Designed for the person looking for Power, Air Flow, Less Service and Maintenance with at Least 30% Less Noise!.

The CALIFORNIA AIR TOOLS 8010 Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest air compressors in the industry having only 60 decibels of sound. The powerful 1.0 HP  motor operates at only 1680 RPM creating less noise and less wear. The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-8010 Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 Plus hours compared to other comparable air compressors with life cycles of 500 hours or less. The Oil-Free pump allows for use in a variety of temperatures and uneven terrains. The large 8.0 Gallon Steel Air Tank is Lightweight (54 lbs) and the wheel kit makes it very easy to transport. This air compressor is ideal for anyone working inside where noise is a major issue.

Craftsman is a line of tools, lawn and garden equipment, and work wear, product is sold since 1927. In the past 92 years, Craftsman continues to provide the high quality products and service to global customers. The Craftsman CMXECXA0331042 oil-free vertical air compressor is the perfect companion for the garage, the job site or the workshop. The 1. 8 HP motor and the 10-gallon tank work together to provide a max pressure of up to 150 PSI. It boasts air flow rates of 4 CFM@90psi and 5 CFM@40psi. With the rubber- reinforced handle and the two eight-inch rugged wheels, the unit is easy to store and moves freely. It features in 2 couplers allowing you to use up to 2 tools at the same time. Conveniently placed gauges allow for easy monitoring of air pressure. Has the quality you expect from Craftsman air compressor. Key Specifications: ★Air Capacity: 10 Gallon ★Horsepower: 1. 8 HP ★Number of Quick Coupler: 2 ★Maximum Pressure: 150 PSI ★Wheel Diameter: 2× 8 Inch Wheels ★Handle type: Rubber Reinforce ★Rating: 5 CFM @ 40 PSI / 4 CFM @ 90 PSI ★Motor type: Induction ★Gauges Size: 2 Inch ★Cord Length: 6 Feet ★Drain Valve: Ball Valve ★Sound Level: Policy: ★1 year limited lifetime . Warning Notes: ★Keep this equipment away from children and people under 16 years old.

Amazon.com

Makita’s 2.5HP Air Compressor is equipped with Makita’s Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability under tough job site conditions.

View larger

MAC2400 Features PERFORMANCE – Cast-iron cylinder with greater bore and stroke for maximum performance DURABILITY – Runs at a lower RPM (1,720) resulting in greater motor and pump life RELIABILITY – Low AMP draw reduces instances of tripped breakers CONVENIENCE – Oil drain and oil sight glass conveniently located for easy access and maintenance INCLUDES – Oil and 1/4″ universal quick coupler

Tool Specifications Horsepower 2.5 Pump Oil-lubricated Tank 4.2 “Twin Stacked” gal. Performance 90 PSI: 4.2 cfm 40 PSI: 4.8 cfm Maximum Pressure 0 – 130 PSI AMPS 12.3 Noise Level 79 dB Size 19-3/8″x18-3/4″x18″ Net Weight 77 lbs.

2.5 HP with Big Bore Engineered Pump
The MAC2400 is powered by a 2.5 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job-site conditions. The MAC2400 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 4.2 gallon twin-stacked tank sustains an operating pressure of 130 PSI, and delivers 40PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers. The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications
The MAC2400 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC2400 is just another example of Makita’s commitment to innovative technology and best-in-class engineering.

About Makita Big Bore Air Compressors
Makita Big Bore Air Compressors deliver higher output and less noise for improved job site performance. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. All Makita Big Bore Air Compressors are oil lubricated and equipped with large automotive style filters for increased air intake and greater efficiency. Makita Big Bore Air Compressors deliver industrial power and results with improved durability.

About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty
Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What’s in the Box
Makita MAC2400 2.5 HP Air Compressor, oil and 1/4-inch universal quick coupler.

From the Manufacturer

The new MAC2400 – Twin Stack air compressor by Makita is blowing away the competition. With built-in features such as a super quiet motor that draws only 12.3 amps to operate, a lower 1720 RPM rating and a heavy duty Intake Air Filter system like no other, its easy to see how this unit will out last and outperform everyone else. It delivers 4.2CFM @ 90PSI and is equipped with a lever handled ball valve drain system to get rid of condensation build up in the tank . The exclusive finned discharge tubing increases heat dissipation while reducing moisture in the lines and the easily removable cast iron cylinder reduces wear for increased pump life. High quality, maximum performance – just what you expect from Makita.