Top 10 35 Foot Low Voltage Vacuum Hose

The 99713 is designed to provide superior airflow in a lightweight design to address the two features most desired in a central vacuum on/off control hose. The 360 degree swivel handle is designed to reduce kinking, stress on the hose, and stress on you as the user by relaxing any tension in the hose as you move through the room. The 35 foot length provides extra reach and insure there is sufficient length to prevent tugging and pulling to reach to the corner of the room. The installed hose sock is designed to reduce the possibility of marking walls, floor, or furnishings while also avoiding wear to doorframes and chair legs. The hose is compatible with industry standard central vacuum inlets including Nutone branded valves equipped with low voltage contacts in the opening of the inlet valve. You can confirm suitability by putting your finger into the hose opening and confirming there are two low voltage contacts on the upper surface of the opening. No need for concern as these contacts are low volt and will not harm you in any fashion. The 99713 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Vacumaid, Canavac, Hoover, Cyclovac, Husky, Vacuflo inlets with pin jack inlets, M+S, MD, Imperium, and most regional brands.

Sourced exclusively by EXACT FIT PARTS. This is a high quality aftermarket product. Quality and Fit guaranteed or your money back. Any use of brand names, item numbers, or Model numbers in the description of this product are solely for the purpose of confirming compatibility. Includes 1 central vac 35′ low voltage direct connect hose 35 Foot crush proof grey hose works with most central vacuum cleaners from Beam, Nutone, and Electrolux Low voltage switch with button lock On/off suctioning switch 1 1/2″ inlet valve diameter will fit most standard units 1 1/4″ attachment side will work with many wands and attachments Also known as a non-electric, standard central vacuum hose

OVO attachment kit with universal 35ft switch control low-voltage crushproof hose and all purpose brushes and accessories: deluxe 12” hard-floor brush, an adjustable metal wand, deluxe storage accessory organizer, chrome hose hanger, dusting brush, upholstery brush and crevisse tool. Ideal for hardwood & tile floors.

The 99506 is a 1. 375” X 35 foot crush proof vacuum hose designed for on off control of the central vacuum at the hose handle. The 360 degree gas pump grip is lightweight and perfectly balanced to reduce the effort of vacuuming. The universal wall end is designed for compatibility with industry standard wall inlets that use two low voltage contacts to permit on-off control of the vacuum. The 99506 is often paired with air turbine nozzles which use the air stream from your vacuum to turn an agitator on carpeted surfaces, with floor brushes, combination nozzles, and above the floor accessories like dusting tools, crevice tools, and upholstery tools. The 99506 is not for use with electric drive power nozzles It also is compatible with all major brands of central vacuum including Beam, Electrolux, Eureka, Nutone, Vacu-Flo, Vacumaid, MD, Cyclovac, Wal Vac, Honeywell, M&S, Canavac, Imperium, and Husky.

Deluxe light-weight Crush-Proof Air Hose with 360 degree full swivel handle and pistol-grip handle. This central vacuum hose fits most of central vacuum brands like Beam, Electrolux, Canavac, Eureka, Allegro, Kenmore, and more. Ideal for hardwood, tile, ceramic flooring and area rugs. his hose will NOT turn on an electric powerhead and is meant to be used with air-driven accessories and turbo brushes, not electric powerhead. This hose is standard and will fit any standard 1.5 inch inside diameter wall valves:. Please measure your wall valves carefully before purchasing. Attn Nutone and Kenmore: Nutone and Kenmore are NOT standard and some have less than 1.5 inch inside diameter wall valves. BE CAREFUL and measure properly. Attn Vacuflo: This hose works ONLY with universal style inlets / ports that have 2 metal ball contacts on the inner part of the port and will NOT replace the Vaculfo hoses that have 2-prongs at the end of the hose itself

Nadir Universal Low-Voltage Hose for Central Vacuum, Swivel Wall-End Cuff, 35ft

This is a GENUINE VACUFLO 50’ Turbogrip Central Vacuum Hose and Hose Rack NOTE: This hose works ONLY with VACUFLO style inlets / ports (please double check the style of inlet that you have before you purchase this item). Included in this package are the following: · GENUINE VACUFLO 50 foot Turbogrip Hose with a low-voltage on/off control switch (features a comfort grip style handle, 360 degree swivel feature for ease of use, button lock connection for wands, and an air relief valve for suction control · 1 Wire Hose Rack This GENUINE Vacuflo central vacuum hose is designed to work with Vacuflo “Automatic” inlets ONLY. The hose has 2 metal low voltage prongs that fit into the inlet so that the switch on the Turbogrip handle can control the on/off function of the vacuum system. This hose will NOT turn on an electric powerhead, and is meant to be used with airdriven powerheads such as the Turbocat.